UVT-S-AR, DNA/RNA UV-cleaner box

Description

DNA/RNA UV-cleaner box UVT-S-AR is designed for clean operations with DNA samples. UV-cleaner box provide protection against contamination.

Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4L (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (9,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV – cleaner box during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

 

Specification

Walls material Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)
Working surface material Stainless steel
Open UV-lamp 2x30W built‑in bactericidal, TUV30WG13 UV-C
UV radiation level 15 mW / cm2 / s
Radiation type UV (λ = 253.7 nm), ozone-free
Digital time setting of direct UV exposure 1 min–24 hrs / non–stop (increment 1 min)
UV-recirculator 1 х 30W (efficiency >99% per 1 hour)
Daylight lamp (for working area illumination) 1 x TLD-30W
Thickness of side panels 4 mm
Thickness of upper front panel 8 mm
Thickness of screen 5 mm
Optical transmission 95%
UV protection >96%, UV-protection film
Working area 1200 × 520 mm
Safety features Automatic open UV-lamp switch off when screen is open
Power outlets inside the unit 3 Built-in sockets max. 1000 W and inlet for power cords
Nominal operating voltage 100-240 V, 50/60Hz
Power consumption 135 W
Overall dimensions (W×D×H) 1245 × 585 × 585 mm
Weight (net / gross) 58 / 68.5 kg
Optional table T-4L (1290 × 600 × 770 mm)
Optional drawer unit LF-1 (300 × 450 × 705 mm)

Cat. Nr.

UVT-S-AR incl. power cord
BS-040107-AAA 230VAC 50/60Hz Euro plug
BS-040107-AAB 230VAC 50/60Hz UK plug
BS-040107-AA3 230VAC 50/60Hz AU plug
BS-040107-AA7 100VAC 50/60Hz US plug
BS-040107-AAC 120VAC 60Hz US plug
----------------
BS-040107-BK T-4L, Table
BS-050101-CK T-4L-P, Table with shelves
BS-050101-BK LF-1, Drawer unit
---------------- Optional accessories
BS-040107-DK PDS-250, DNA/RNA removing solution, 250ml
BS-040107-AK IQ OQ document
BS-040107-CK PQ document

Video

Frequently asked questions

How efficient is a UV-Cleaner box?

Biosan`s UV-Cleaner box with UV-Recirculator provide efficient DNA amplicon decontamination that has been proven experimentally. See brochure.

What disinfection solutions do you recommend for cleaning UV-Cleaner box?

UVT-S-AR, UVT-B-AR, UVC/T-M-AR.

Glass panels on the outside:

use a soft sponge or cloth with common washing solution for glass, remove excess and wipe dry. Do not use ethanol or other organic solvents.

Internal cleaning and disinfection:

The following substances are recommended to use for decontamination: 70% ethanol, sodium hypochlorite solution, DNA/RNA removing solution (e.g. DNA-Exitus Plus™, RNase-Exitus Plus™). After washing the inside parts of the box it is necessary to rub them dry.

UVC/T-AR.

External cleaning:

The front and side panels are made of Plexiglas™ and are prone to scratches and optical transmission capacity decrease if improperly cleaned. Use a soft sponge or cloth with mild soap and water, remove excess water and wipe dry.

Internal cleaning and disinfection:

Use a mild detergent for all the interior surfaces. For decontamination, use a special DNA/RNA removing solution (e.g. DNA-Exitus Plus™, RNase-Exitus Plus™). After washing the inside parts of the box it is necessary to rub them dry.

Can I work in a UV-Cleaner box while the UV-Recirculator is on?

Yes, you can. The UV-lamp of the UV-Recirculator is enclosed into a metal case and no light escapes, therefore it is not harmful for the operator.

Is table included with the UV-Cleaner box?

No, table for the cabinet can be ordered separately.

Does the UV-Cleaner box has HEPA filter?

No, it does not. Instead, Biosan`s UV-Cleaner box are equipped with a UV-Recirculator, that provides constant working area decontamination during cabinet`s operation.

Does PCR cabinet can be used as a fume hood for chemical testing?

No, PCR cabinet is used only for clean operations with DNA/RNA samples.

Can UV-Cleaner box be used for tissue/cell culture applications?

No, it is not recommended to use PCR Cabinets for tissue/cell culture. Biosan PCR Cabinets are designed for sample preparation for PCR reactions and manipulation with nucleic acids.

PCR cabinets have built-in UV recirculator to protect the samples in the working area, but personnel and environment are not protected.

How often should I change/clean the dust filters in the UV-Cleaner box?

Operator should monitor the amount of dust in the filter, because it depends on the duration of use and cleanliness of the working room. The procedure for replacing/cleaning dust filters is described in the user manual p.13. See user manual below.

What lamps are installed in a UV-Cleaner box?

In a UV-cleaner box there is 1x fluorescent lamp (15 W) for working area illumination, 1x open UV lamp (25 W) for working area disinfection and 1x UV Recirculator (25 W) for constant decontamination inside the box during opearation.

How long is a service life of a UV-lamp?

Average lifetime of UV lamps supplied is 9000 h. That is equivalent to 1 year of non-stop use everyday for 24h

Downloads